FX1-1050
EN
Copyright © 2015
P a g e
|
9
www.Ford-tools.com
10
MAINTENANCE
Check every day the tightening of screws and nuts. Except the procedures
described in this manual, this tool needs no specific maintenance. The repair of
the tool's inner components is of the competence of specialists. The cleaning of
plastic parts is done with a soft damp cloth and a bit of mild soap. Never
submerge the tool and do not use detergents, alcohol, spirit, etc...For an in-depth
cleaning, please consult the after-sales department.
WARNING: For maintenance and cleaning, always remove
the plug from the electric power supply. Never use water or
other liquids to clean electric parts.
11
TECHNICAL DATA
Model n°
FX1-1050
Rated voltage
–
rated frequency
230-240V~ 50Hz
Rated Power
1600W
Protection class
class II
Cable length
5m
Chuck type
SDS Hex
Impact Rate
2000 beats/min
12
NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level L
pA
99 dB(A)
Acoustic power level L
wA
104 dB(A)
ATTENTION! Wear hearing protection when sound pressure
is over 85 dB(A).
a
w
(Vibration):
19.2 m/s²
K = 1.5 m/s²
13
SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a
particular connecting cable which is available from our service department.
Replacement of the connecting cable must only be carried out by our service
department (see last page) or by a qualified person (qualified electrician).
14
STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool
and dry place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build
-up.
