Ford FUSION Page 81 Owner'S Manual Download

Page: 81 / 304

SYNC system hands free control
feature (if equipped)

Press and hold

briefly until the

voice

icon appears on the display

to use the voice command feature.

Press and hold

to send a call or

text message.

Press OK to confirm your selection.

For further information on the
SYNC system, refer to the

SYNC supplement.

Navigation system/SYNC hands
free control features
(if equipped)

Press and hold the

control briefly

until the voice

icon appears on

the Navigation display to use the
voice command feature.

Press

to complete a voice

command.

For further information on the Navigation system/SYNC system, refer to
the

Navigation and SYNC supplements.

MOON ROOF (IF EQUIPPED)

You can move the glass panel of the moon roof back to open or tilt up
(from the closed position) to ventilate the vehicle.

Do not let children play with the moon roof or leave children
unattended in the vehicle. They may seriously hurt themselves.

2008 Fusion

(fsn)

Owners Guide (post-2002-fmt)
USA

(fus)

Driver Controls

Summary of Contents for FUSION

















































































































































































































































































































Search results

Summary of Contents for FUSION

Reviews:

Related manuals for FUSION

Brands by name

Popular brands

Ford FUSION, Owner'S Manual

Search results

Summary of Contents for FUSION

Reviews:

Related manuals for FUSION

Brands by name

Popular brands