12
ASSEMBLY
•
Attach the upper and lower gun hooks.
•
Install two M6 screws & the lock nuts, wrench tighten until the nuts are snug.
Attaching Upper and Lower Gun Hooks (See fig 3)
•
Align the hole of the high pressure hose hook to hole on the handle bar.
•
Install four self-tapping screws, until the screws are snug.
Attaching High Pressure Hose Hook (See fig 4)
•
Align the accessory hook with the holes.
•
Install two plastic rivets, until the plastic rivet is snug.
•
Press hard with your finger to lock the rivet.
(SUGGESTION: If you find the rivet is hard to press with finger, please use the nozzle to help.)
Attaching Accessory Hook (See fig 4)
FIG 4
FIG 3
•
Screw the spray wand and the trigger handle together until they are secure.
Insert the inlet coupler of the spray hose into the threaded fitting on the high pressure spray gun and thread the black
nut on by turning clockwise until it is hand tight.
•
FIG 5
FIG 6
Attaching the Spray Gun (See fig 5 & 6)
Summary of Contents for FPWG3100H-J
Page 8: ...8 PRESSURE WASHER PARTS ASSEMBLY...
Page 24: ......
