![Ford Focus 3 c346 2013 Manual Download Page 49](http://html1.mh-extra.com/html/ford/focus-3-c346-2013/focus-3-c346-2013_manual_2318395049.webp)
-49-
E1337 5 0
5
5. Disconnect the electrical connector.
Note:
When fitting the headlamp, make
sure that you reconnect the electrical
connector properly.
Note:
When fitting the headlamp, make
sure that you fully engage the headlamp
in the lower fixing point.
Note:
When fitting the headlamp, make
sure that the screw is located in the
headlamp moulding before you install it.
CHANGING A BULB
WARNINGS
Switch the lights and the ignition
off.
Let the bulb cool down before
removing it.
We recommend that you ask
your Ford dealer to change the
bulbs if your vehicle is fitted with Xenon
headlamps. There is a risk of injury due to
high voltage.
Lighting
REMOVING A HEADLAMP
WARNING
Have Xenon bulbs changed by a
trained technician. There is a risk
of electric shock.
1.
Open the bonnet. See
Opening
and closing the bonnet
(
page
121
).
2. Remove the screw.
3. Pull the headlamp as far as possible
towards the front of the vehicle to
disengage it from the lower fixing
point.
4. Lift the outer side of the headlamp
and remove it.
E133215
2
2
4
3
Summary of Contents for Focus 3 c346 2013
