CONDITIONS
DETAILS/RESULTS/ACTIONS
B1
CHECK FOR IGNITION VOLTAGE TO THE DRIVER WINDOW POWER WINDOW CONTROL SWITCH
Do the driver power window control switch LEDs illuminate?
Yes
GO to
B2
.
No
GO to
B7
.
B2
CHECK FOR SWITCH VOLTAGE TO THE DRIVER POWER WINDOW CONTROL SWITCH
Operate the driver passenger side front window control switch.
Does the passenger window operate from the driver passenger side front window control switch?
Yes
GO to
B3
.
No
REPAIR circuit 15-AJ7 (GN/BU). TEST the system for normal operation.
B3
CHECK THE ONE-TOUCH DOWN RELAY
Operate the driver power window control switch to the first detent in the DOWN position.
Does the one-touch down relay click?
Yes
GO to
B4
.
No
GO to
B9
.
B4
CHECK FOR VOLTAGE TO THE DRIVER POWER WINDOW MOTOR DOWN CIRCUIT
Driver Power Window Motor C782
Operate the driver power window control switch to the first detent in the DOWN position.
Measure the voltage between the driver power window motor C782 pin 2, circuit 32-AJ26 (WH), harness side and ground.
Is the voltage greater than 10 volts?
Yes
GO to
B5
.
No
GO to
B12
.
B5
CHECK FOR VOLTAGE TO THE DRIVER POWER WINDOW MOTOR UP CIRCUIT
Operate the driver power window control switch to the UP position.
Measure the voltage between the driver power window motor C782 pin 1, circuit 33-AJ26 (YE), harness side and ground.
Page 3 of 17
2001 Focus Workshop Manual
8/21/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1Y/~MUS~LEN/20/S...
