Ford FL-1010, Instruction Manual

Page: 7 / 8

FL-1010
EN
Copyright © 2015
P a g e | 6
www.Ford-tools.com
10 CLEANING
ƒ
All exterior surfaces of the spotlight can be wiped clean with a soft cloth
dampened with soapy water.
ƒ
Do not immerse or submerge any part of your light in water or any other
solvent.
Never use solvents or cleaning agents containing petroleum
(petrol, kerosene, oil), paint thinner, turpentine, alcohol, or
ammonia. Harsh materials like these can damage surfaces.
11 MAINTENANCE
ƒ
Only qualified service personnel must perform repairs.
ƒ
Do not open the exterior casing of the Work Light as there are no user
serviceable parts inside.
ƒ
Opening or visible attempts to open or repair a light may void any guarantee
and/or cause damage to the product or personal injury.
ƒ
LED bulbs will never wear out under normal conditions and do not need to be
replaced.
ƒ
The rechargeable battery pack cannot be replaced.
12 WARRANTY
ƒ
This product is warranted as provided by law for a 12 -month period effective
from the date of purchase by the first user.
ƒ
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings,
brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades,
etc. ; damage or defects resulting from maltreatment, accidents or alterations;
nor the cost of transportation.
ƒ
Damage and/or defects resulting from inappropriate use also do not fall under
the warranty provisions.
ƒ
We also disclaim all liability for any bodily injury resulting from inappropriate
use of the tool.
ƒ
Repairs may only be carried out by an authorised customer service centre for
FORD tools.
ƒ
You can always obtain more information at the number Customer phone
351 234 604 097
ƒ
Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.
ƒ
At the same time, no claim can be made on the warranty if the damage of the
device is the result of negligent maintenance or overload.
ƒ
Definitely excluded from the warranty is damage resulting from fluid
permeation, excessive dust penetration, intentional damage (on purpose or by
gross carelessness), inappropriate usage (use for purposes for which the
device is not suitable), incompetent usage (e.g. not following the instructions
given in the manual), inexpert assembly, lightning strike, erroneous net
voltage. This list is not exhaustive.