FL-1010
EN
Copyright © 2015
P a g e
|
3
www.Ford-tools.com
4
SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with essential requirements of the European
directive(s)
Read manual before use
5
SAFETY WARNINGS
WARNING Read all safety warnings and instructions.
Failure to
follow all the warnings and instructions may result in electric shock, fire
and/or serious injury.
SAVE ALL THE WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Do not use if broken, bent, cracked or damaged parts are presented. Any light
that appears damaged in any way or operates abnormally should be removed
from service immediately.
Inspect before each use.
This light is not to be used by children. Keep out of reach of children.
Do not shine directly into eyes.
Do not leave the light turned on and unattended.
Do not alter or modify this product and do not attempt to repair the battery.
Do not expose to fire or high temperatures. The battery may explode.
Do not charge or use near open flames or glowing embers.
6
CHARGING INSTRUCTIONS
The Work Light must be fully charged before being used for the first time as
soon as taken from the package.
This will ensure that the battery gives its best performance now and on future
re-charging cycles.
The AC and DC charging adapters are for re-charging the battery only. They
cannot be used to directly power the light.
Always ensure the light is switched off while charging.
6.1
Using the AC Charging Adapter
1.
Unscrew the back cover pull out the battery pack and disconnect all wires
2.
Plug the adapter’s jack plug into the socket on the battery pack.
3.
Plug the adapter into a 230V AC socket
4.
The charging indicator lamp will glow RED while charging is in progress.
5.
The battery will be fully charged after approximately 6-8 hours, and the RED
charging indicator will turn to GREEN when the unit is fully charged.
6.
Disconnect the jack plug from the light, remove the adapter from the wall
socket or switch off.
