Original Instructions
-
４
-
４
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Safety Warning
1.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause
personal injury.
2.
Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord.
Contact
with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
3.
Let bit cool before touching, changing or adjusting it. Bits heat up dramatically
while in use, and can burn you.
4.
If the drill bit jams, release the trigger immediately; drill torque can cause injury
or break bit.
5.
Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact after-sales service center for a
replacement.
6.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
