![Ford ESCAPE Owner'S Manual Download Page 52](http://html.mh-extra.com/html/ford/escape/escape_owners-manual_2318213052.webp)
PRINCIPLE OF OPERATION
MyKey allows you to program keys with
restricted driving modes to promote good
driving habits. All but one of the keys
programmed to the vehicle can be
activated with these restricted modes. Any
keys that have not been programmed are
referred to as an administrator key or
admin key which can be used to:
•
create a restricted key
•
program optional MyKey settings
•
clear all MyKey features altogether.
Once a key has been programmed you can
access the following information using the
information display control:
•
How many admin keys and MyKeys are
programmed to the vehicle.
•
The total distance the vehicle has been
driven with a MyKey.
For vehicles equipped with intelligent
access key (push button start), when both
a MyKey and an admin intelligent access
key (fob) are present, the admin fob will
be recognized by the vehicle to start the
engine.
Standard Settings
These settings cannot be changed.
•
Belt-Minder®. This cannot be disabled
and the five-minute timer does not
expire. The audio system is muted
when MyKey Belt-Minder® is activated.
•
Early low fuel. Warnings are displayed
in the information display control
followed by an audible tone when the
fuel tank is at one-eighth tank or less.
•
Driver assist features, if equipped on
your vehicle, are forced on: Parking aid,
Blind Spot Information System
(BLIS®) with Cross Traffic Alert and
the Collision Warning System.
Optional Settings
These settings can be configured right after
a MyKey is first created or changed
afterword with an Admin key.
•
Vehicle speed limit of 80 mph (130
km/h). Visual warnings are displayed
followed by an audible tone when
vehicle speed has reached 80 mph
(130 km/h).
•
Vehicle speed warning of 45, 55 or 65
mph (75, 90, or 105 km/h). Visual
warnings are displayed followed by an
audible tone when the preselected
vehicle speed is exceeded.
•
Audio system maximum volume of
45%. A message in the audio system
is displayed when attempting to
exceed the limited volume.
•
AdvanceTrac®. The system cannot be
turned off when Always-on has been
set.
CREATING A MYKEY
Use the information display control to
create a MyKey:
1.
Insert the key you want to program into
the ignition or, if the vehicle is equipped
with push button start, put the
intelligent access key in the backup
slot. Backup slot information is located
in a different chapter. See
Starting
and Stopping the Engine
(page 139).
2. Turn the ignition on.
3. Access the main menu in the
information display. Use the left
steering controls to select
Settings
,
then
MyKey
by pressing
OK
or
>
button.
4. Press
OK
to select
Create
.
49
MyKey™
Summary of Contents for ESCAPE
