![Ford ESCAPE Owner'S Manual Download Page 146](http://html.mh-extra.com/html/ford/escape/escape_owners-manual_2318213146.webp)
•
Check for heat anywhere in the
electrical hookup once the system has
been operating for approximately 30
minutes.
•
Make sure the system is unplugged and
properly stowed before driving your
vehicle. Make sure the protective cover
seals the prongs of the block heater
cord plug when not in use.
•
Make sure the heater system is
checked for proper operation before
winter.
Using the Engine Block Heater
Make sure the receptacle terminals are
clean and dry prior to use. Clean them with
a dry cloth if necessary.
The heater uses 0.4 to 1.0 kilowatt-hours
of energy per hour of use. The system does
not have a thermostat. It achieves
maximum temperature after
approximately three hours of operation.
Using the heater longer than three hours
does not improve system performance and
unnecessarily uses electricity.
143
Starting and Stopping the Engine
Summary of Contents for ESCAPE
