Ford E-150 1997, Owner'S Manual

Page: 50 / 192

Lap belts
The lap belts in the center seating
position of the three-passenger
bench seat and both inboard seats
of the four-passenger bench seat
do not adjust automatically. You
must adjust them to fit snugly and
low as possible around your hips.
Do not wear the lap belt around
your waist.
Make sure you insert the tongue
into the correct buckle. If you
need to lengthen the belt, turn the
tongue at a right angle to the belt
and pull across your lap until it
reaches the buckle. If you need to
tighten the belt, pull the loose end
of the webbing until it is snug
across the hips. Shorten and fasten
the belt when not in use.
Safety belt extension assembly
If the safety belt assembly is too
short, even when fully extended,
20 cm (eight inches) can be added
to the safety belt assembly by
adding a safety belt extension
assembly. Safety belt extension
assemblies are available for front
or rear seating positions and are
not interchangeable.
•
Front seating positions (part
number 611C22)
•
Rear seating positions (part
number 611C22)
Safety belt extension assemblies
can be obtained from your dealer
at no cost.
eco_belt_extension
Seating and safety restraints
50