Ford Content Owner'S Manual Download Page 23

Page: 23 / 336

•

In CD mode, pressing the REW control rewinds the CD within the
current track.

Fast forward

The fast forward control works in
tape and CD modes.

•

In the tape mode, tape direction
will automatically reverse when
the end of the tape is reached.

•

In CD mode, pressing the control fast forwards the CD within the
current track.

Tape direction select

Press to play the alternate side of
the tape.

Eject function

Press the EJ control to stop and
eject a tape.

Press the EJ control to stop and
eject a CD.

Dolby

noise reduction

Dolby

noise reduction operates in

tape mode. Dolby

noise reduction

reduces the amount of hiss and
static during tape playback.

Press the

control to activate (and deactivate) the Dolby

noise

reduction.

Dolby

noise reduction is manufactured under license from Dolby

Laboratories Licensing Corporation. “Dolby

” and the double-D

symbol

are registered trademarks of Dolby

Laboratories Licensing

Corporation.

Entertainment Systems

Summary of Contents for Content

















































































































































































































































































































































Search results

Summary of Contents for Content

Reviews:

Ford Content, Owner'S Manual, Page: 23 / 336

Search results

Summary of Contents for Content

Reviews: