Ford Connected Wall Box 16A Three Phase, Installation Manual

Page: 16 / 255

EN
4 Ford Connected Wall Box Installation Manual
SKLJ98-10C823-AA
Electrical Characterist-
ics IEC
does not comply with BS7671 for
connection to TN networks in the
United Kingdom.
EMC class
Emitted interference: Class B
(residential, business, commercial
areas)
Immunity: industrial areas
Overvoltage category
II, as per EN 60664
Protection class
I
Protective devices
A residual current circuit breaker
must be provided from the install-
ation side. See Criteria for the
electrical connection.
Integrated power
meter
Ac/- 5 %
Connections
Cable feed
Mounted on-wall, or in-wall
Connection cross-sec-
tion
(wire dimension)
Cross-section of the connection
cable must comply with local
codes/regulations. Connection at
Power Input inside.
Charging cable includ-
ing coupler
Type 2 charging cable according
to
EN 62196-1 and EN 62196-2
Cable length 7.5 m
Max. charging capa-
city (kW)
7.4 kW (1 phase) Maximum capa-
city
adjustable via DIP switches
11 kW (3 phase) Maximum capa-
city
adjustable via DIP switches
Communication &
features
Vehicle–charger Com-
munication Protocol
(CP)
IEC 61851-1:2017, Annex A
Electrical Characterist-
ics IEC
Display
9 RGB LEDs
Network interfaces
Wi-Fi / WLAN 802.11n - 150 Mbit/
s
Authentication and
Mobile communica-
tions
Bluetooth (BLE 4.2) – Setup app
OCPP
Version 1.6
Mechanical data
Dimensions (W × H ×
D)
258 x 450 x 141 mm
10.2 x 17.7 x 5.5 inches
Weight (including
Wall Mount Bracket &
Charging Cable)
6,02 kg
13.27 lbs
Installation height
Minimally 900 mm / 35.5 inches
above floor level
measured to / from the bottom of
the device
IP protection class,
device
IP65
Protection against
mechanical impact
IK10
Ambient conditions
Operating temperat-
ure range
-30 °C to +50 °C
-22 °F to +122 °F
Storage temperature
range (°C)
-40 °C to +85 °C
-40 °F to +210 °F
Altitude (m)
Max. 3,000 m above sea level
Max. 9,842 ft above sea level
Certification compat-
ibility
Other standards and
guidelines
– 2014/53/EU (Radio Equipment
Directive) [OJ L 153, 22.5.2014, p.
62-106]
– 2011/65/EU (RoHS-Directive)
[OJ L 174, 1.7.2011, p. 88-110]
Electrical Characterist-
ics IEC
– 2014/53/EU – Art.3 (1) a) Sicher-
heit
– EN IEC 61851-1:2019; EN
61439-1:2011; IEC 61439-7:2018,
IEC 62955:2018 (RDC-MD),
– EN 62233:2008
– 2014/53/EU – Art.3 (1) a) Sicher-
heit (Funkteil)
– EN 62368-1:2014; EN 62311:2008
– 2014/53/EU – Art.3 (1) b) EMV
– EN 61000-6-2:2005; EN
61000-6-3:2007 + A1:2011; IEC
61851-21-2:2018
– 2014/53/EU – Art.3 (1) b) EMV
(Funkteil)
– EN 301 489-1 V2.2.3 (2019-11); EN
301 489-17 V3.2.4 (2020-09)
– 2014/53/EU – Art.3 (2) Funk-
spektrum
– EN 300 328 V2.2.2 (2019-07); EN
301 893 V2.1.1 (2017-05)
– 2011/65/EU
– EN IEC 63000:2018
Tested OCPP
backends
Ford OCPP (Open Charge Point
Protocol) server
NOTE
A shutdown, or a reduction in charging current, may occur
to prevent the wall box overheating. This is a safety fea-
ture.
3.1 Wireless interface connections
3.1.1 Bluetooth
The Bluetooth connection is used to set up the Wi-Fi AP (ac-
cess point) when starting up the wall box. Note that you
cannot control the charging wall box through Bluetooth.