manualshive.com logo in svg

Ford B-MAX, Quick Reference Manual

Share
Download
Ford B-MAX Quick Reference Manual Download Page 11

MANUAL SEATS

Moving the Seat Backward and

Forward

Adjusting the Lumbar Support

Adjusting the Height of the Driver’s
Seat

Recline Adjustment

STARTING AND STOPPING THE
ENGINE - 1.0L ECOBOOST™

Our range of three-cylinder engines sound
different to the four-cylinder engine that
you may have become used to. It may take
a little time for you to get used to this
different sound.

STARTING THE ENGINE

Vehicles With Manual
Transmission

Note:

Do not touch the accelerator pedal.

Note:

Releasing the clutch pedal while the

engine is starting will stop the engine
cranking and return to ignition on.

1.

Fully depress the clutch pedal.

Note:

Vehicles with push button start: Briefly

press the button.

2. Start the engine.

Vehicles With Automatic
Transmission

Note:

Do not touch the accelerator pedal.

Note:

Releasing the brake pedal while the

engine is starting will stop the engine
cranking and return to ignition on.

1.

Move the transmission selector lever to
position 

P

 or 

N

.

2. Fully depress the brake pedal.

9

B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Summary of Contents for B-MAX


















Reviews:

No comments

Brands by name

Popular brands

Load more brands