manualshive.com logo in svg

Ford 2016 EXPLORER, Owner'S Manual, Page: 137 / 541

Share
Download
Ford 2016 EXPLORER Owner'S Manual Download Page 137

DUAL:

 Press the button to switch on control for the passenger side of the

vehicle.

D

Heated seats (if equipped):

 Press the button to switch the heated seats on

and off.

E

Passenger temperature control:

 Adjust the temperature on the passenger

side.

F

Climate controlled seats:

 Press the button to switch the climate controlled

seats on and off.

G

Fan speed control:

 Adjust the volume of air circulated in the vehicle.

H

Power:

 Press the button to switch the system on and off. When the system is

off, it prevents outside air from entering the vehicle.

I

Driver temperature control:

 Adjust the temperature setting using the control

on the driver side. This control also adjusts the passenger side temperature
when you switch off dual zone mode.

J

Heated rear window:

 Press the button to switch the heated rear window on

and off.

K

Defrost:

 Select to distribute air through the windshield air vents. Air distribution

to the instrument panel and footwell vents turns off. You can also use this
setting to defrost and clear the windshield of a thin covering of ice.

L

MAX Defrost:

 Press the button to switch on defrost. Outside air flows through

the windshield vents, air conditioning automatically turns on, and fan
automatically adjusts to the highest speed. You can also use this setting to
defrost and clear the windshield of a thin covering of ice. The heated rear window
also automatically turns on when you select maximum defrost.

M

Note:

 To prevent window fogging, you cannot select recirculated air when

maximum defrost is on.

AUTO:

 Press the button to switch on automatic operation. Adjust to select the

desired temperature. Fan speed, air distribution, air conditioning operation, and
outside or recirculated air are automatically adjusted to heat or cool the vehicle
to maintain the desired temperature. You can also turn off dual zone mode by
pressing and holding the button for greater than two seconds.

N

HINTS ON CONTROLLING THE
INTERIOR CLIMATE

General Hints

Note:

Prolonged use of recirculated air may

cause the windows to fog up.

Note:

You may feel a small amount of air

from the footwell air vents regardless of the
air distribution setting.

Note:

To reduce humidity build-up inside

your vehicle, do not drive with the system
switched off or with recirculated air always
switched on.

134

Explorer (TUB), enUSA, First Printing

Climate Control

Summary of Contents for 2016 EXPLORER






























































































































































































































































































































































































































































































































































Reviews:

No comments