manualshive.com logo in svg

Ford 2016 EXPLORER, Owner'S Manual, Page: 135 / 541

Share
Download
Ford 2016 EXPLORER Owner'S Manual Download Page 135

A/C:

 Press the button to switch the air conditioning on or off. Air conditioning

cools your vehicle using outside air. To improve the time to reach a comfortable
temperature in hot weather, drive with the windows open until you feel cold air
through the air vents.

G

Note:

 In certain conditions (for example, maximum defrost), the air conditioning

compressor may continue to operate even though the air conditioning is
switched off.

MAX A/C:

 Press the button for maximum cooling. Recirculated air flows through

the instrument panel vents, air conditioning automatically turns on and the fan
automatically adjusts to the highest speed.

H

Passenger temperature control:

 Adjust the temperature on the passenger

side.

I

DUAL:

 Press the button to switch on control for the passenger side of the

vehicle.

J

Recirculated air:

 Press the button to switch between outside air and

recirculated air. The air currently in the passenger compartment recirculates.
This can reduce the time needed to cool the interior and reduce unwanted odors
from entering your vehicle.

K

Note:

 Recirculated air may also turn on and off automatically in instrument

panel or instrument panel and floor airflow modes during hot weather to improve
cooling efficiency.

Fan speed control:

 Adjust the volume of air circulated in the vehicle.

L

AUTO:

 Press the button to switch on automatic operation. Adjust to select the

desired temperature. Fan speed, air distribution, air conditioning operation, and
outside or recirculated air are automatically adjusted to heat or cool the vehicle
to maintain the desired temperature. You can also switch off dual zone mode
by pressing and holding the button for more than two seconds.

M

AUTOMATIC CLIMATE
CONTROL - VEHICLES WITH:
SONY AUDIO SYSTEM

Note:

You can switch temperature units

between Fahrenheit and Celsius.

132

Explorer (TUB), enUSA, First Printing

Climate Control

Summary of Contents for 2016 EXPLORER






























































































































































































































































































































































































































































































































































Reviews:

No comments