manualshive.com logo in svg

Ford 2016 EXPEDITION, Owner'S Manual

Share
Download
Ford 2016 EXPEDITION Owner'S Manual Download Page 72

Type Two

E205756

Volume up.

A

Seek up or next.

B

Media.

C

Seek down or previous.

D

Volume down.

E

Media

Press repeatedly to scroll through available
audio sources.

Seek, Next or Previous

Press the seek button to:
•

Tune the radio to the next or previous
stored preset.

•

Play the next or the previous track.

Press and hold the seek button to:
•

Tune the radio to the next station up
or down the frequency band.

•

Seek through a track.

VOICE CONTROL

 (If Equipped)

Type One

E205757

Phone mode.

A

Voice recognition.

B

See 

SYNC™

 (page 323).

69

Expedition (TB7) Canada/United States of America, enUSA, First Printing

Steering Wheel

Summary of Contents for 2016 EXPEDITION






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands