manualshive.com logo in svg

Ford 2016 EXPEDITION, Owner'S Manual

Share
Download
Ford 2016 EXPEDITION Owner'S Manual Download Page 55

Potential Causes

Condition

Program a spare transmitter.  See 

Passive

Anti-Theft System

 (page 62).

I lost a key.

The vehicle has a remote start system trans-
mitter that is recognized as an admin key. Clear
all MyKeys by using the remote start trans-
mitter.  See 

Using MyKey With Remote Start

Systems

 (page 50).

I accidentally programmed all keys as
MyKeys.

The vehicle's system does not recognize any
programmed MyKeys.  See 

Creating a MyKey

(page 47).

An unknown transmitter has been created as
a MyKey.

MyKey total includes one additional key.

The vehicle has a remote start system.  See

Using MyKey With Remote Start Systems

(page 50).

An unknown transmitter has been programmed
to the vehicle as an admin key.

Admin key total includes one additional
key.

The vehicle has a remote start system.  See

Using MyKey With Remote Start Systems

(page 50).

The MyKey is not being used by the intended
user.

The MyKey distance does not accumu-
late.

The MyKeys have been cleared and the MyKey
system has been reset.

An admin transmitter is present at vehicle start.

No MyKey functions with the trans-
mitter.

There are no MyKeys programmed to your
vehicle.  See 

Creating a MyKey

 (page 47).

52

Expedition (TB7) Canada/United States of America, enUSA, First Printing

MyKey™

Summary of Contents for 2016 EXPEDITION






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands