WINDSHIELD WIPERS
Note:
Fully defrost the windshield before
switching on the windshield wipers.
Note:
Make sure the windshield wipers are
switched off before entering a car wash.
Note:
Clean the windshield and wiper
blades if they begin to leave streaks or
smears. If that doesn't resolve the issue,
install new wiper blades. See
Changing
the Wiper Blades
(page 147).
Note:
Do not operate the wipers on a dry
windshield. This may scratch the glass,
damage the wiper blades or cause the wiper
motor to burn out. Always use the
windshield washers before wiping a dry
windshield.
E207133
Rotate the end of the control:
•
away from you to increase the wiper
speed.
•
toward you to decrease the wiper
speed.
WINDSHIELD WASHERS
Note:
Do not operate the wipers on a dry
windshield. This may scratch the glass,
damage the wiper blades or cause the wiper
motor to burn out. Always use the
windshield washer before wiping a dry
windshield.
Note:
Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
Press the end of the stalk to activate the
washer.
•
A brief press causes a single wipe
without washer fluid.
•
A quick press and hold causes the
wipers to swipe three times with
washer fluid.
•
A long press and hold will activate the
wipers and washer fluid for up to 10
seconds.
E207134
43
E-Series (TE4) Canada/United States of America, enUSA, Edition date: 03/2015, Second Printing
Wipers and Washers