2. Close the window a third time to the
point of resistance. You disabled the
bounce-back feature and you can now
close the window manually. The
window travels past the point of
resistance and you can close it fully.
Contact an authorized dealer as soon as
possible if the window does not close after
the third attempt.
Resetting the Bounce-Back Feature
WARNING
The bounce-back feature remains
turned off until you reset the
memory.
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
1.
Lift and hold the control until the
window is fully closed.
2. Release the control.
3. Lift and hold the control again for a few
seconds.
4. Release the control.
5. Lift and hold the control again for a few
seconds.
6. Release the control.
7.
Press and hold the control until the
window is fully open.
8. Lift and hold the control until the
window is fully closed.
9. Release the control.
10.
Open the window and then try to
close it automatically.
11.
Repeat the procedure if the window
does not close automatically.
Accessory Delay
(If Equipped)
You can use the window controls for
several minutes after switching off the
ignition or until opening either front door.
GLOBAL OPENING AND
CLOSING
You can also operate the power windows
with the ignition off using the global
opening and global closing function.
Note:
Global opening will only operate for
a short period of time after you have
unlocked your vehicle using the remote
control.
Note:
Global closing will only operate if you
have set the memory correctly for each
window. See
Power Windows
(page 70).
Global Opening
(If Equipped)
E71955
To open all the windows:
1.
Press and release the remote control
unlock button.
2. Press and hold the remote control
unlock button for at least three
seconds.
71
Fiesta (CCT), enUSA, Second Printing
Windows and Mirrors
