Use the brake shift override to move the
gearshift lever from the park position in the
event of an electrical malfunction or if your
vehicle has a dead battery.
Apply the parking brake and turn the
ignition off before performing this
procedure.
E142193
3
2
1.
Apply the parking brake and switch the
ignition off before carrying out this
procedure.
2. Remove the retaining screw.
3. Remove the right side center console
side panel.
E142214
4
4. Press the brake pedal. Using a suitable
tool rotate the lever forward while
pulling the transmission selector lever
out of the
P
(park) position and into
the
N
(neutral) position.
5. Install the console cover.
6. Apply the brake pedal, start your
vehicle and release the parking brake.
HILL START ASSIST
(If Equipped)
WARNINGS
The hill start assist feature does not
replace the parking brake. When you
leave the vehicle, always apply the
parking brake.
You must remain in the vehicle once
you have activated the hill start
assist feature.
During all times, you are responsible
for controlling the vehicle,
supervising the hill start assist
system and intervening, if required.
If the engine is revved excessively, or
if a malfunction is detected when the
hill start assist feature is active, the
hill start assist feature will be deactivated.
This feature makes it easier to pull away
when the vehicle is on a slope without the
need to use the parking brake.
When this feature is active, the vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes release automatically
when the engine has sufficient torque to
prevent your vehicle from rolling down the
grade. This is an advantage when pulling
away on a slope, (for example from a car
park ramp, traffic lights or when reversing
uphill into a parking space).
90
Ecosport (CBW) India, Vehicles Built From: 01-08-2015, enIND, Edition date: 08/2015
Transmission
