WARNINGS
Make sure that your vehicle is on firm,
level ground with the wheels pointing
straight ahead.
Switch off the ignition and apply the
parking brake.
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave your
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Make sure that the arrows on
directional tires point in the direction
of rotation when your vehicle is
moving forwards. If you have to fit a spare
wheel with the arrows pointing in the
opposite direction, have the tire refitted in
the correct direction by an authorized
dealer.
Do not work underneath your vehicle
when it is supported only by a jack.
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
Do not lay alloy wheels face down
on the ground, this will damage the
paint.
Note:
The spare wheel is located on the
rear swing gate.
To remove the spare wheel, slacken the
lug nuts (including the locking nut). The
locking wheel nut key is located in the
luggage compartment, under the floor
cover in the tool kit.
1.
Loosen each wheel lug nut one-half
turn counterclockwise, but do not
remove them.
2. Jack up your vehicle until the tire is
clear of the ground.
3. Remove the lug nuts and the wheel.
Removing and Installing a Spare
Wheel
Note:
The spare wheel is located on the
rear swing gate.
Note:
The locking wheel nut key is located
in the luggage compartment, under the floor
cover in the tool kit.
Vehicles Without Spare Wheel Cover
3
2
1
E191028
1.
Remove the two nuts.
2. Remove the locking nut.
3. Remove the spare wheel.
4. Install in the reverse order.
143
Ecosport (CBW) India, Vehicles Built From: 01-08-2015, enIND, Edition date: 08/2015
Wheels and Tires
