manualshive.com logo in svg

Ford 2014 EXPEDITION, Owner'S Manual

The Ford 2014 EXPEDITION Quick Reference Manual is a must-have resource for owners of this reliable SUV. This comprehensive manual provides essential information, tips, and instructions to ensure smooth operation and maintenance. Download it for free at manualshive.com, your one-stop destination for all your manual needs.

Share
Download
background image

•

Normally, adding 1 gallon (3.8L) of fuel is enough to restart the
engine. If the vehicle is out of fuel and on a steep grade, more than
1 gallon (3.8L) may be required.

•

The service engine soon indicator may come on. For more information
on the service engine soon indicator, refer to the

Instrument Cluster

chapter.

See

Settings

in the

Instrument Cluster

chapter for information on

calculating DTE (Distance to empty).

Refilling With a Portable Fuel Container

WARNING:

Do not insert the nozzle of portable fuel containers

or aftermarket funnels into the Easy Fuel® system. This could

damage the fuel system and its seal, and may cause fuel to run onto the
ground instead of filling the tank, which could result in serious personal
injury.

WARNING:

Do not try to pry open or push open the Easy Fuel®

system with foreign objects. This could damage the fuel system

and its seal and cause injury to you or others.

With the Easy Fuel® “no cap” fuel system, use the following directions
when filling from a portable fuel container:

When filling the vehicle’s fuel tank from a portable fuel container, use the
funnel included with the vehicle.

1. The white plastic funnel is located under the
spare tire tool panel located in the floor
compartment behind the rear seat.

2. Unlatch and remove the spare tire tool panel. Remove the white
plastic funnel.

3. Slowly insert the funnel into the Easy Fuel system.

4. Fill the vehicle with fuel from the portable fuel container.

Fuel and Refueling

181

2014 Expedition

(exd)

Owners Guide gf, 2nd Printing, November 2013
USA

(fus)

Summary of Contents for 2014 EXPEDITION


















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 EXPEDITION

RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Ford FOCUS RS 2018 Owner'S Manual Supplement preview
FOCUS RS 2018
Brand: Ford Pages: 52
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
Condor T-RAMP Quick Start Manual preview
T-RAMP
Brand: Condor Pages: 2
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2
Xblitz XME PRO User Manual preview
XME PRO
Brand: Xblitz Pages: 56
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12

Brands by name

Popular brands

Load more brands