2. Do not wipe off any grease on the
battery terminals on the back
surface of the circuit board.
3. Remove the old battery.
4. Insert the new battery. Refer to the diagram inside the remote entry
transmitter for the correct orientation of the battery. Press the battery
down to ensure that the battery is fully seated in the battery housing
cavity.
5. Snap the two halves back together.
Car Finder
Press the button twice within three seconds. The horn will
sound and the turn signals will flash. We recommend you use
this method to locate your vehicle, rather than using the panic
alarm.
Sounding a Panic Alarm
Press the button to activate the alarm. Press the button again
or switch the ignition on to deactivate.
Note:
The panic alarm will operate regardless of the ignition position.
PLA
CE B
A
TTER
Y
ON O
T
HER HALF
DO NO
T
T
OUCH
THE TERMINALS
Keys and Remote Control
57
2014 Econoline
(eco)
Owners Guide gf, 3rd Printing, September 2013
USA
(fus)