PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal.
USING CRUISE CONTROL
WARNINGS
Do not use cruise control in heavy
traffic, on winding roads or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
When you are going downhill, your
vehicle speed may increase above
the set speed. The system will not
apply the brakes. Change down a gear to
assist the system in maintaining the set
speed. Failure to do so could result in loss
of vehicle control, serious injury or death.
Note:
Cruise control will disengage if your
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
The cruise control switches are located on
the steering wheel.
Switching Cruise Control On
Press and release
ON
.
The indicator will display in the
instrument cluster.
Setting a Speed
1.
Accelerate to the desired speed.
2. Press and release
SET+
.
3. Take your foot off the accelerator
pedal.
Changing the Set Speed
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
•
Press and release
SET+
or
SET-
. The
set speed will change in approximately
1 mph (2 km/h) increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
Canceling the Set Speed
Pull
CAN
toward you and release, or tap
the brake pedal. The system will not erase
the set speed.
Resuming the Set Speed
Pull
RES
toward you and release.
Switching Cruise Control Off
Note:
You will erase the set speed if you
switch the system off.
Press and release
OFF
or switch the
ignition off.
128
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelbase Kombi/Kombi BaseLong Wheelbase Kombi/Kombi TrendShort Wheelbase Kombi/Kombi Trend
Cruise Control