Ford 2013 Police Owner'S Manual Download Page 317

Page: 317 / 375

SYNC is an in-vehicle communications system that works with your
Bluetooth-enabled cellular phone and portable media player. This allows
you to:

•

Make and receive calls.

•

Access and play music from your portable music player.

•

Use 911 Assist

, Vehicle Health Report and SYNC Services (Traffic,

Directions & Information) (if equipped).

•

Use applications, such as Pandora and Stitcher, via SYNC AppLink™
(if applicable).

•

Access phonebook contacts and music via voice commands.

•

Stream music from your connected phone.

•

Text message.

•

Use the advanced voice recognition system.

•

USB device charging (if your device supports this).

SYNC

317

2013 Police

(pol)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Police
























































































































































































































































































































































































Search results

Summary of Contents for 2013 Police

Reviews:

Ford 2013 Police, Owner'S Manual, Page: 317 / 375

Search results

Summary of Contents for 2013 Police

Reviews: