When you believe your system is not operating properly
The main function of the tire pressure monitoring system is to warn you
when your tires need air. It can also warn you in the event the system is no
longer capable of functioning as intended. Please refer to the following
chart for information concerning your tire pressure monitoring system:
Low tire
pressure
warning light
Possible cause Customer action required
Solid warning
light
Tire(s)
under-inflated
1. Make sure tires are at the proper
pressure. See
Inflating your tires
in
this chapter.
2. After inflating your tires to the
manufacturer’s recommended pressure
as shown on the Tire Label (located on
the edge of driver’s door or the
B-Pillar), the vehicle must be driven
for at least two minutes over 20 mph
(32 km/h) before the light turns off.
Wheel and tire
swap without
training
Train the sensors to the vehicle. Refer
to the TPMS
Training procedure
in
this section.
TPMS
malfunction
If the tires are properly inflated and
installed and trained, and the light
remains on, contact your authorized
dealer as soon as possible.
Flashing warning
light
Wheel and tire
swap without
training
Train the sensors to the vehicle. Refer
to the TPMS
Training procedure
in
this section.
TPMS
malfunction
If the tires are properly inflated, but
the light remains on, contact your
authorized dealer as soon as possible.
When inflating your tires
When putting air into your tires (such as at a gas station or in your
garage), the tire pressure monitoring system may not respond
immediately to the air added to your tires.
It may take up to two minutes of driving over 20 mph (32 km/h) for the
light to turn off after you have filled your tires to the recommended
inflation pressure.
Wheels and Tires
277
2013 Police
(pol)
Owners Guide gf, 2nd Printing
USA
(fus)