Ford 2013 MUSTANG Owner'S Manual Download Page 249

Page: 249 / 447

Replacing Front Sidemarker Bulb

1. Make sure the headlamp control is in the off position.

2. Remove the hex head screws
attaching the underbody forward
aeroshield.

3. Remove the underbody forward
aeroshield to gain access to the
front sidemarker assembly.

4. Rotate the socket counterclockwise and remove from the lamp
assembly.

5. Carefully pull the bulb straight
out of socket.

248

Maintenance

2013 05+ Mustang

(197)

Owners Guide gf, 3rd Printing
USA

(fus)

Summary of Contents for 2013 MUSTANG
































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 MUSTANG

Reviews:

Ford 2013 MUSTANG, Owner'S Manual, Page: 249 / 447

Search results

Summary of Contents for 2013 MUSTANG

Reviews: