Ford 2011 C-Max Page 62 Owner'S Handbook Manual Download

Page: 62 / 300

REAR FOG LAMPS

E70720

WARNINGS

Only use the rear fog lamps when
visibility is restricted to less than 50
metres.

Do not use the rear fog lamps when
it is raining or snowing and visibility
is more than 50 metres.

HEADLAMP LEVELLING

Note:

Vehicles with Xenon headlamps

are equipped with automatic headlamp
levelling.

E70722

Raised headlamp beams

Lowered headlamp beams

You can adjust the level of the headlamp
beams according to the vehicle load.

Recommended headlamp levelling switch positions

Switch posi-

tion

Load in

luggage

compartment

Load

Third row

seats

Second row

seats

Front seats

1-2

0 (0.5)

1-2

1 (0.5)

1-2

3 (0.5)

Max

1-2

4 (1.5)

Max

See

Vehicle identification plate

(page 216).

Vehicles with active suspension.

Lighting

Summary of Contents for 2011 C-Max













































































































































































































































































































Search results

Summary of Contents for 2011 C-Max

Reviews:

Related manuals for 2011 C-Max

Brands by name

Popular brands

Ford 2011 C-Max, Owner'S Handbook Manual

Search results

Summary of Contents for 2011 C-Max

Reviews:

Related manuals for 2011 C-Max

Brands by name

Popular brands