Ford 2011 C-Max Owner'S Handbook Manual Download Page 205

Page: 205 / 300

E93302

Small arrow-shaped marks on the sills

show the location of the jacking points.

E92932

E93020

Assembling the wheel brace

Type one

WARNING

When returning the wheel brace
extension to its original position, take
care not to get your fingers caught.

Note:

Make sure that the wheel brace is

fully extended.

E122546

Extend the wheel brace.

Type two

CAUTION

The screw-in towing eye has a

left-hand thread

. Turn it

anti-clockwise to install it. Make sure

that the towing eye is fully tightened.

E122502

Insert the screw-in towing eye into the
wheel brace.

203

Wheels and tyres

Summary of Contents for 2011 C-Max













































































































































































































































































































Search results

Summary of Contents for 2011 C-Max

Reviews:

Brands by name

Popular brands

Ford 2011 C-Max, Owner'S Handbook Manual

Search results

Summary of Contents for 2011 C-Max

Reviews:

Brands by name

Popular brands