Ford 2010 Edge Page 157 Owner'S Manual Download | Manualshive

Page: 157 / 328

background image

WARNING:

Do not attempt to service, repair, or modify the

airbag SRS, its fuses or the seat cover on a seat containing an

airbag. Contact your authorized dealer as soon as possible.

WARNING:

All occupants of the vehicle should always wear

their safety belts even when an airbag SRS is provided.

How does the side airbag system work?

The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
automotive safety experts known as the Side Airbag Technical Working
Group. These recommended testing procedures help reduce the risk of
injuries related to the deployment of side airbags.

The side airbag system consists of
the following:

•

An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.

•

The same warning light,
electronic control and diagnostic
unit as used for the front airbags.

•

Two crash sensors mounted on the B pillar (one on each side of the
vehicle).

•

Two crash sensors located at the C pillar behind the rear doors (one
on each side of the vehicle).

Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
The airbag SRS is designed to activate when the vehicle sustains lateral
deceleration sufficient to cause the sensors to close an electrical circuit
that initiates airbag inflation.

Seating and Safety Restraints

157

2010 Edge

(edg)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

«
...
155
156
157
158
159
...
»

Summary of Contents for 2010 Edge









































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Edge

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Brand: Thule Pages: 8

Brand: Flash Cover Pages: 2

Brand: Whelen Engineering Company Pages: 9

Brand: tams elektronik Pages: 19

Dunlop L.D02.C.M

Brand: Sumitomo Pages: 22

Brand: Mobility Networks Pages: 52

Stargazer Spirit XTR Skylight

Brand: Lippert Pages: 8

2000 Accord Sedan

Brand: Honda Pages: 320

Brand: FIRRAK Pages: 12

Brand: BabySafe Pages: 43

Brand: E-Lead Pages: 11

Brand: T-Tech Pages: 1

Brand: Prorack Pages: 13

MOPAR GLADIATOR

Brand: Jeep Pages: 37

Brand: Honeywell Pages: 16

Brand: Honeywell Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands