Ford 2010 Crown Victoria Owner'S Manual Download Page 31

Page: 31 / 309

TUNE:

Press to manually go up

(

) or down (

) the radio

frequency.

MUTE:

Press to mute the playing

media. Press again to return to the
playing media or turn the volume
control to adjust the volume.

Eject:

Press to eject the CD. If

the disc is not removed within the
allotted time, the system will
automatically reload the CD and begin play.

Note:

The eject function will

work when the ignition is turned off.

BASS:

Press BASS; then

press

SEL

decrease/increase the level of bass
output.

TREB (Treble):

Press TREB; then

press

SEL

decrease/increase the level of treble
output.

BAL (Balance):

Press BAL; then

press

SEL

to shift sound to

the left/right speakers.

FADE:

Press FADE; then press

SEL

to shift sound to the

rear/front speakers.

SEL:

Use with Bass, Treble,

Balance, Fade and other menu
functions.

MENU:

Press MENU to access

the following functions:

Autoset:

Allows you to set the strongest local radio stations without

losing your original manually set preset stations for AM/FM1/FM2. Press
MENU until AUTOSET appears in the display. Press

SEL

to turn

ON or OFF. When the six strongest stations are filled, the station stored
in preset 1 will begin playing. If there are less than six strong stations,

TREB

BASS

SEL

FADE

BAL

SEL

Entertainment Systems

2010 Crown Victoria

(cro)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for 2010 Crown Victoria






















































































































































































































































































































Search results

Summary of Contents for 2010 Crown Victoria

Reviews:

Ford 2010 Crown Victoria, Owner'S Manual, Page: 31 / 309

Search results

Summary of Contents for 2010 Crown Victoria

Reviews: