manualshive.com logo in svg

Ford 2009 Mustang, Owner'S Manual

The Ford 2009 Mustang Owner's Manual Supplement is a comprehensive and essential guide for owners of this iconic vehicle. This manual provides valuable information on maintenance, safety, troubleshooting, and more. Download your free copy of this manual from manualshive.com, ensuring that you have all the necessary information at your fingertips.

Share
Download
background image

WARNING:

Exceeding the Safety Compliance Certification Label

vehicle weight rating limits could result in substandard vehicle

handling or performance, engine, transmission and/or structural
damage, serious damage to the vehicle, loss of control and personal
injury.

GCW (Gross Combined Weight)

– is the weight of the loaded vehicle

(GVW) plus the weight of the fully loaded trailer.

GCWR (Gross Combined Weight Rating)

– is the maximum allowable

weight of the vehicle and the loaded trailer – including all cargo and
passengers – that the vehicle can handle without risking damage.
(Important: The towing vehicles’ braking system is rated for operation at
GVWR, not at GCWR. Separate functional brakes should be used for safe
control of towed vehicles and for trailers where the GCW of the towing
vehicle plus the trailer exceed the GVWR of the towing vehicle.

The

GCW must never exceed the GCWR.

Maximum Loaded Trailer Weight

– is the highest possible weight of a

fully loaded trailer the vehicle can tow. It assumes a vehicle with only
mandatory options, no cargo (internal or external), a tongue load of
10–15% (conventional trailer), and driver only (150 lb. [68 kg]).

Consult

your authorized dealer (or the

RV and Trailer Towing Guide

provided by your authorized dealer) for more detailed
information.

WARNING:

Do not exceed the GVWR or the GAWR specified on

the Safety Compliance Certification Label.

WARNING:

Do not use replacement tires with lower load

carrying capacities than the original tires because they may

lower the vehicle’s GVWR and GAWR limitations. Replacement tires
with a higher limit than the original tires do not increase the GVWR
and GAWR limitations.

2009 05+ Mustang

(197)

Owners Guide
USA

(fus)

Tires, Wheels and Loading

172

Summary of Contents for 2009 Mustang





































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Mustang

Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Toyota Solara guide Owner'S Manual preview
Solara guide
Brand: Toyota Pages: 497
Stack ROLL POD Installation Manual preview
ROLL POD
Brand: Stack Pages: 4
AutoMaxi SUPRA 44 Montage preview
SUPRA 44
Brand: AutoMaxi Pages: 2
Honda 2008 S2000 Manual preview
2008 S2000
Brand: Honda Pages: 280
Davis Instruments 8126VSS Installation Manual preview
8126VSS
Brand: Davis Instruments Pages: 16
Malone Stax Pro2 Installation & Loading Instructions preview
Stax Pro2
Brand: Malone Pages: 16
Porsche Turbo 2007 Driver Manual preview
Turbo 2007
Brand: Porsche Pages: 347
Toyota PT228-89460 Manual preview
PT228-89460
Brand: Toyota Pages: 7
Defi DF06501?DF06506, DF06601?DF06606, DF06701?DF06706, DF06801?DF06806,DF07004?DF07006, DF11501?DF11506, DF11601?DF11606 Manual Manual preview
DF06501?DF06506, DF06601?DF06606, DF06701?DF06706, DF06801?DF06806,DF07004?DF07006, DF11501?DF11506, DF11601?DF11606
Brand: Defi Pages: 2
Defender CH-223 Manual preview
CH-223
Brand: Defender Pages: 4

Brands by name

Popular brands

Load more brands