Ford 2009 F-250 Owner'S Manual Download Page 38

Page: 38 / 419

To view the station name or type:

When the desired category appears

in the display, press TEXT/SCAN to toggle between displaying the station
type (COUNTRY, ROCK, etc.) or the station name (WYCD, WXYZ, etc.).

BASS:

Press MENU to reach the bass setting. Use

SEEK, SEEK

to adjust.

TREB (Treble):

Press MENU to reach the treble setting.

Use

SEEK, SEEK

to adjust.

BAL (Balance):

Press MENU to reach the balance setting.

Use

SEEK, SEEK

to adjust the audio between the left

(L) and right (R) speakers.

FADE:

Press MENU to reach the fade setting. Use

SEEK, SEEK

to adjust the audio between the back (B) and

front (F) speakers.

ALL SEATS (Occupancy mode)

(Available on Audiophile radios only):

Press MENU repeatedly to access. Press

SEEK

optimize sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

SPEEDVOL (Speed sensitive volume, if equipped):

Press MENU to

reach the SPEEDVOL setting. Radio volume automatically gets louder
with increasing vehicle speed to compensate for road and wind noise.

Use

SEEK, SEEK

to adjust.

The default setting is

off;

increasing your vehicle speed will not change

the volume level.

Adjust

1–7:

Increasing this setting from 1 (lowest setting) to 7 (highest

setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

Track/Folder Mode:

Available only on MP3 discs in CD mode. In Track

Mode, pressing

SEEK

will scroll through all tracks on the disc.

In Folder mode, pressing

SEEK

will scroll only through tracks

within the selected folder.
Press

FOLDER, FOLDER

to access the previous/next folder (if

available).

2009 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

Entertainment Systems

Summary of Contents for 2009 F-250




































































































































































































































































































































































































































Search results

Summary of Contents for 2009 F-250

Reviews:

Related manuals for 2009 F-250

Brands by name

Popular brands

Ford 2009 F-250, Owner'S Manual

Search results

Summary of Contents for 2009 F-250

Reviews:

Related manuals for 2009 F-250

Brands by name

Popular brands