Ford 2009 F-250 Owner'S Manual Download Page 119

Page: 119 / 419

Audio control features

Press MEDIA to select:

•

AM, FM1, FM2

•

CD (if equipped)

•

DVD (if equipped)

•

SAT1, SAT2 or SAT3 (Satellite
Radio mode, if equipped).

•

LINE IN (Auxiliary input jack)

In AM, FM1, or FM2 mode:

•

Press

SEEK

select preset stations within the
selected radio band or press and
hold to select the next/previous
radio frequency.

In Satellite radio mode (if
equipped):

•

Press

SEEK

advance through preset channels or subscribed channels.

In CD mode:

•

Press

SEEK

to select the next selection on the CD or

press and hold to forward or reverse the CD.

In any mode:

•

Press VOL + or − to adjust
volume.

2009 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

Driver Controls

119

Summary of Contents for 2009 F-250




































































































































































































































































































































































































































Search results

Summary of Contents for 2009 F-250

Reviews:

Related manuals for 2009 F-250

Brands by name

Popular brands

Ford 2009 F-250, Owner'S Manual

Search results

Summary of Contents for 2009 F-250

Reviews:

Related manuals for 2009 F-250

Brands by name

Popular brands