DIPPED/MAIN BEAMS
To change the bulb, proceed as follows:
❒
remove the protecting rubber cap
mentioned above;
❒
press on the central electrical
connector
A-fig. 17
and withdraw
the assembly;
❒
remove the bulb
B
and replace it;
❒
fit the new bulb, making the outlines
of the metallic part coincide with the
grooves on the reflector;
❒
refit the bulb holder catches and
reconnect the electrical connector;
❒
refit the cap
A
locking it properly.
Side indicators
To change the bulb, proceed as follows:
❒
prise in the point indicated by the
arrow, so as to compress the fixing clip
and extract the assembly
B-fig. 16
;
❒
turn the bulb holder
counterclockwise, remove the snap-
fitted bulb and replace it;
❒
reinstall the bulb holder into the lens,
then install the assembly
B
making
sure that the fixing clip has clicked.
fig. 17
KA00089m
118
W
ARNING
LIGHTS AND MESSAGES
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA
TIONS
ALPHABETICAL
INDEX
YOUR CAR
SAFETY
ST
AR
TING AND
DRIVING
IN AN
EMERGENCY
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒
turn the bulb holder clockwise
A-fig. 15
and withdraw it;
❒
remove the bulb
B
pushing it gently
and turning counterclockwise
(bayonet fitting), then replace it;
❒
refit the bulb holder
A
by turning it
clockwise and locking it properly;
fig. 16
B
KA00088m
fig. 15
KA00087m
101-130 Ford KA GB 15-07-2008 8:50 Pagina 118
