Ford 2008 F-150 Page 88 Owner'S Manual Download | Manualshive

Page: 88 / 400

background image

MAX A/C:

For maximum cooling performance, press

, A/C,

,

and set the temperature to 60°F and the highest blower setting.

1.

Defrost

: Distributes outside air through the windshield defroster

vents and demister vents. Can be used to clear the windshield of fog and
thin ice.

2.

Fan speed control:

Press to manually increase or decrease the

fan speed. To return to automatic fan operation, press AUTO.

3. A.

R

Rear defroster:

Press to defrost the rear window. Refer to

Rear window defroster

in this section for more information. If your

vehicle is equipped with both rear defroster and heated mirrors, the
same button will activate both.

3. B.

Heated mirrors (if equipped):

Press to activate/deactivate. This

feature will remove ice and snow from the side view mirrors.

4.

Passenger heated seat control:

Press to heat the passenger

seat. Press once to activate high heat (two indicator lights). Press again
to activate low heat (one indicator light). Press again to deactivate the
passenger heated seat.

5.

:

Distributes air through the windshield defroster ducts, demister

outlets, and the front and rear seat floor ducts. The system will
automatically provide outside air to reduce window fogging.

6.

:

Distributes air through the floor and rear seat floor ducts.

7.

:

Distributes air through the windshield defroster ducts, demister

outlets, and the front and rear seat floor ducts.

8.

:

Distributes air through the instrument panel and center console

registers (if equipped).

9.

Driver heated seat control:

Press to heat the driver seat. Press

once to activate high heat (two indicator lights). Press again to activate
low heat (one indicator light). Press again to deactivate the driver
heated seat.

10.

Manual override controls:

Allows you to manually select where

airflow is directed. To return to full automatic control, press AUTO.

11.

Recirculation control:

Press to activate/deactivate air

recirculation in cabin. Recirculated air may reduce the amount of time to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculation can be
engaged manually in any other airflow selection except

(defrost).

Recirculation may turn off automatically.

2008 F-150

(f12)

Owners Guide (post-2002-fmt)
USA

(fus)

Climate Controls

88

«
...
86
87
88
89
90
...
»

Summary of Contents for 2008 F-150

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 F-150

Brand: Happy Orange Pages: 2

Brand: Camcar Pages: 6

Brand: GMC Pages: 20

Indigo MANZA QUADRAJET 90

Brand: TATA Motors Pages: 10

Brand: Phonocar Pages: 2

Brand: Metra Electronics Pages: 2

Dunlop L.D02.C.M

Brand: Sumitomo Pages: 22

Brand: Quadratec Pages: 14

Portable Car Umbrella

Brand: Mynew Pages: 5

Brand: Honda Pages: 268

Brand: Buick Pages: 371

Brand: Brodit Pages: 2

Brand: Seat Pages: 300

Brand: Ford Pages: 46

Brand: Kia Pages: 417

Brand: VDO Pages: 6

Brand: Chevrolet Pages: 490

Brand: Champion Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands