Ford 2006 Escape J87R, Bodyshop Manual

Page: 10 / 90

00-00–6
GENERAL INFORMATION
Symbols of Body Dimensions
•
The following 8 symbols are used to indicate the standard points.
End Of Sie
SERVICE PRECAUTIONS
id000000600200
Arrangement of Workshop
•
Arrangement of the workshop is important for safe and efficient work.
Safety Precautions
•
Protective head covering and safety shoes should
always be worn. Depending upon the nature of
the work, gloves, safety glasses, ear protectors,
face shield, etc., should also be used.
Vehicle Protection
•
Use seat covers and floor covers.
•
Use heat-resistant protective covers to protect glass areas and seats from heat or sparks during welding.
•
Protect items such as moldings, garnishes, and
ornaments with tape when welding.
Remove Dangerous Articles
•
Remove the fuel tank before using an open flame
in that area. Plug connection piping to prevent
fuel leakage.
SYMBOL
MEANING SYMBOL MEANING
Center of circular hole
Center elliptical hole
Notch
Panel seam, bead, etc.
Bolt tip
(arrow only)
Center of rectangular-shaped hole
Edge of rectangular-shaped hole
acxuub00000037
Welding
glasses Ear
protectors Weldlng
gloves
Cotton
gloves
Dust mask Safety glasses
Face shield
Safety shoes
acxuub00000038
acxuub00000063
acxuub00000064