P (Park)
This position locks the transaxle and prevents the front wheels from
turning.
To put your vehicle in gear:
•
Start the engine
•
Depress the brake pedal
•
Move the gearshift lever into the desired gear
To put your vehicle in P (Park):
•
Come to a complete stop
•
Move the gearshift lever and securely latch it in P (Park)
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
R (Reverse)
With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R (Reverse).
N (Neutral)
With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.
D (Drive) with Overdrive
The normal driving position for the best fuel economy. The transaxle
operates in gears one through four.
3 (Third)
•
This position allows for all forward gears except overdrive.
•
Provides more engine braking than D (Drive).
•
Use when driving conditions cause excessive shifting from D (Drive)
to other gears. Examples: city traffic, hilly terrain, heavy loads, trailer
towing and when engine braking is required.
1 (First)
•
Transaxle operates in first gear only.
•
Provides maximum engine braking.
•
Allows upshifts by moving gearshift lever.
•
Will not downshift into 1 (First) at high speeds; allows for 1 (First)
when vehicle reaches slower speeds.
2004 Windstar
(win)
Owners Guide (post-2002-fmt)
USA English
(fus)
Driving
173
Summary of Contents for 2004 Windstar
Page 280: ...280 ...
