Ford 2002 F-250 Owner'S Manual Download Page 27

Page: 27 / 264

Bass:

Press BASS; then press

SEL

to decrease/increase

the bass output.

Treble:

Press TREB; then press

SEL

to decrease/increase

the treble output.

Select:

Use with Bass, Treble,

Balance and Fade controls to adjust
levels. Use with MENU to set the
clock and engage RDS.

Balance:

Press BAL; then press

SEL

to shift sound to the

left/right speakers.

Fade:

Press FADE; then press

SEL

to shift sound to the

rear/front speakers.

Menu:

Press MENU and SEL to

access clock mode, RDS on/off,
Traffic announcement mode and
Program type mode.

10.

Memory presets:

To set a

station: Select frequency band
AM/FM; tune to a station, press and
hold a preset button until sound
returns. In CD mode, press to move between CDs.

11.

CD:

Press to select CD mode.

Seamless play:

In CD mode, the

transition between the end of one
CD and the beginning of another will not contain delay time unless SEEK
or a preset control is pressed.

12.

AM/FM:

Press to select AM/FM

frequency band. Hold to initiate

Autostore:

Allows you to set the

strongest local radio stations without losing your original manually set
preset stations for AM/FM1/FM2 . Press and momentarily hold AM/FM.
AUTOSTORE will flash on the display. When the six strongest stations

Entertainment Systems

Summary of Contents for 2002 F-250









































































































































































































































































Search results

Summary of Contents for 2002 F-250

Reviews:

Related manuals for 2002 F-250

Brands by name

Popular brands

Ford 2002 F-250, Owner'S Manual

Search results

Summary of Contents for 2002 F-250

Reviews:

Related manuals for 2002 F-250

Brands by name

Popular brands