•
one wheel nut wrench. Slide over
square end of jack handle.
2. The following steps are required to move the support bracket
(if equipped) away from the spare tire:
•
With tapered end of lug wrench,
loosen the eyebolt on the support
bracket.
•
Line up the eyebolt with the slot
in the support bracket.
•
Slide the support bracket off the
eyebolt and move the support
bracket away from the spare tire.
3. Insert the hooked end of the jack
handle into the rear bumper
opening.
The handle will stop moving and
you will feel forward resistance to
turning when properly engaged.
4. Turn the handle counterclockwise
and lower the spare until you can
slide the tire rearward and the cable
is slack.
5. Remove the retainer through the center of the wheel.
Roadside emergencies
159
Summary of Contents for 1998 F-450
Page 166: ...Front driver side 4x4 Front passenger side 4x4 Roadside emergencies 166...
Page 231: ...3 2 1 5 4 Capacities and specifications 231...
Page 237: ...237...
Page 238: ...238...
