Ford 1997 Mark VIII Owner'S Manual Download

Page: 223 / 315

218

3. Block the wheels. This will prevent your

vehicle from moving unexpectedly.

Working with the engine on:

1. Set the parking brake fully and make sure that

the gearshift is securely latched in P (Park).

2. Block the wheels. This will prevent your

vehicle from moving unexpectedly.

WARNING

Do not start your engine with the air
cleaner removed and do not remove it
while the engine is running.

WARNING

The cooling fan is automatic and may
come on at any time. Always disconnect
the negative terminal of the battery
before working near the fan.

If the battery is disconnected, the computer must
relearn its idle control. See

Battery

in the Index.

File:11fnmc8.ex

Update:Thu Jun 20 14:28:32 1996

Summary of Contents for 1997 Mark VIII




























































































































































































































































































































Search results

Summary of Contents for 1997 Mark VIII

Reviews:

Related manuals for 1997 Mark VIII

Brands by name

Popular brands

Ford 1997 Mark VIII, Owner'S Manual

Search results

Summary of Contents for 1997 Mark VIII

Reviews:

Related manuals for 1997 Mark VIII

Brands by name

Popular brands