Ford 1997 Mark VIII, Owner'S Manual

Page: 191 / 315

186
Do not use hitches that clamp onto your vehicle’s
bumper. The bumper is not designed to bear the
load.
Always check the pressure in all your vehicle’s tires
when preparing to tow (see inflation
recommendation on the tire label).
Using the hitch
Your vehicle uses a load carrying hitch. Because
this type of hitch places the tongue load of a trailer
on the rear wheels of your vehicle, you must
distribute the load in your trailer so that only 10 to
15% of the total weight of the trailer is on the
tongue.
Tie down the load so that it does not shift and
change the weight on the hitch. This will prevent
damage to your vehicle and make your vehicle
easier to handle.
Connecting the safety chains
Always attach the trailer’s safety chains to your
vehicle. They help protect your trailer if the hitch
breaks.
To connect the trailer’s safety chains:
1. Cross the chains under the trailer tongue and
attach them to your vehicle’s frame or hook
retainers. Never attach the safety chains to your
vehicle’s bumper. The bumper is not designed
to bear the weight of a trailer.
2. Make sure that you leave enough slack in the
chains to allow you to turn corners.
If you use a rental trailer, follow the instructions
that the rental agency gives you.
File:09fngf8.ex
Update:Wed Jun 19 10:45:23 1996