![Ford 1997 Aerostar Workshop Manual Download Page 61](http://html.mh-extra.com/html/ford/1997-aerostar/1997-aerostar_workshop-manual_2317376061.webp)
Spring Lock Coupling Safety Clip Installation
1.
Visually check to be sure garter spring is over flared end of female fitting.
2.
Pull on connector opposite the direction of installation to verify that the connector is locked in place. If
connector is not locked in place, refer to Connecting Spring Lock Connector procedure in this section.
3.
NOTE: The black 12.7mm (1/2-inch) clip fits the fuel supply line. The silver 9.5mm (3/8-inch)
clip fits fuel return line.
Install large end of clip to garter spring side of fuel line making sure that clip is properly positioned.
Page 4 of 6
1997 Aerostar/Ranger
2011-04-29
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVKA1025.HTM~gen~ref.HTM