REMOVAL AND INSTALLATION
Spring Lock Connectors
Fuel tubes which connect to MFI engines utilize spring lock push connect fittings in the engine compartment
instead of the plastic or stainless steel push connect fittings. The spring lock push connect fittings work by
insertion of the fitting's male end, which is surrounded by two O-rings, into a female flared end engine fitting.
The coupling engagement is secured by a garter spring which prevents the female flared end from becoming
disengaged from the male end.
Spring Lock Coupling Disconnect Tool D87L-9280-B or equivalent is used to disconnect the 12.7mm (1/2-
inch) spring lock coupling supply fitting. Tool D87L-9280-A or equivalent is used to disconnect the 9.52mm
(3/8-inch) spring lock coupling return fitting.
Section 10-01: Fuel Tank, Filters, Lines and
Electric Fuel Pump
1997 Aerostar, Ranger, Equipped with 2.3L, 3.0L, and 4.0L
Gasoline Engines Workshop Manual
Page 1 of 1
1997 Aerostar/Ranger
2011-04-29
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVKA1024.HTM~gen~ref.HTM
