Ford 1996 Taurus, Manual

Page: 278 / 369

281
*
[SV19400(ALL)08/95]
Engine Coolant Refill Procedure
*
[SV19450(ALL)01/95]
When the entire cooling system is drained and
refilled, the following procedure should be used
to ensure a complete fill:
[SV19500(ALL)04/95]
❑
With the engine OFF and cool, remove the
pressure cap, located on the coolant reservoir.
[SV19550(ALL)04/95]
❑
Add a 50/50 mixture of specified coolant and
water to the coolant reservoir. Refer to Refill
Capacities later in this chapter for the correct
amount.
[SV19600(ALL)02/95]
❑
Continue to fill the reservoir until the coolant
is at the top of the cold fill range.
[SV19650(ALL)04/95]
❑
Reinstall the pressure cap until it clicks.
*
[SV19700(ALL)05/95]
❑
Start and idle the engine until the radiator
upper hose is warm (this indicates the
thermostat is open and coolant is flowing
through the entire system).
[SV19750(ALL)04/95]
❑
Immediately shut off the engine and let cool.
Cautiously remove the pressure cap and add
a 50/50 mixture of specified coolant and
water until the coolant is within the cold fill
range in the coolant reservoir.
[SV19800(ALL)02/95]
❑
Reinstall the pressure cap until a click is
heard and felt.
*
[SV19850(ALL)03/95]
❑
Check for leaks at the draincock.
*
[SV19900(ALL)03/95]
❑
Recheck the engine coolant level, using the
recommended procedure, after one or two
occasions of vehicle use.
File:15fcsvt.ex
Update:Tue Jan 23 13:58:51 1996