Ford 1996 Taurus Page 203 Manual Download

Page: 203 / 369

205

[DR17800(ALL)03/95]

Parking Brake

[DR17900(ALL)01/95]

The parking brake should be used whenever
you park your vehicle.

[DR18000(ALL)01/95]

This brake is suspended just below the bottom
of the instrument panel to the left of the brake
pedal.

[DR18300(ALL)11/94]

one third page art:0001391-A

The parking brake and parking brake release

[DR18420(ALL)06/95]

WARNING

Always set the parking brake fully and
make sure the gearshift is securely latched
in P (Park).

[DR18700(ALL)01/93]

WARNING

If the parking brake is fully released, but
the Brake System light remains on, have
the brakes checked immediately. They
may not be working properly.

[DR18750(ALL)11/91]

WARNING

To prevent personal injury, do not release
the parking brake while outside the
vehicle.

File:10fcdrt.ex

Update:Mon Jan 22 15:59:33 1996

Summary of Contents for 1996 Taurus


















































































































































































































































































































































































Search results

Summary of Contents for 1996 Taurus

Reviews:

Related manuals for 1996 Taurus

Brands by name

Popular brands

Ford 1996 Taurus, Manual

Search results

Summary of Contents for 1996 Taurus

Reviews:

Related manuals for 1996 Taurus

Brands by name

Popular brands