Ford 1996 Mustang Page 97 Manual Download

Page: 97 / 332

temporary resumption of manual speed control
while ascending steep grades in order to
maintain the selected speed.

[SC09300(MBC )08/93]

half page art:0001014-B

The speed control switches on the steering wheel

[SC10100( ALL)08/95]

To set the speed control:

[SC10300( ALL)08/95]

Press and release the ON switch.

[SC10400( ALL)08/95]

Accelerate to the desired speed above
30 mph (50 km/h) using the accelerator
pedal.

[SC10800( ALL)08/95]

Press the SET ACCEL switch and release it
immediately to set your speed. If you keep
this switch pressed, your speed will continue
to increase.

[SC10900( ALL)08/95]

Take your foot off the accelerator pedal.
Your vehicle will maintain the speed you set.

File:07rcscm.ex

Update:Wed Mar 27 09:30:54 1996

Summary of Contents for 1996 Mustang













































































































































































































































































































































Search results

Summary of Contents for 1996 Mustang

Reviews:

Related manuals for 1996 Mustang

Brands by name

Popular brands

Ford 1996 Mustang, Manual

Search results

Summary of Contents for 1996 Mustang

Reviews:

Related manuals for 1996 Mustang

Brands by name

Popular brands