Ford 1996 Mustang Manual Download Page 33 | Manualshive

Page: 33 / 332

Ford 1996 Mustang Manual Download Page 33

31

%

*

[SR25300( ALL)05/95]

R

WARNING

REAR-FACING INFANT SEATS SHOULD
NEVER BE USED IN THE FRONT SEAT.
REAR-FACING INFANT SEATS MUST
ALWAYS BE PLACED IN THE REAR
SEAT. Failure to follow these instructions
could result in serious injury.

*

[SR25350( ALL)07/95]

All child restraint systems are designed to be
secured in vehicle seats by lap belts or by the
lap portion of a lap-shoulder belt.

*

[SR25400( ALL)06/95]

R

WARNING

If you do not properly secure the safety
seat, the child occupying the seat may be
injured during a collision or sudden stop.
An unsecured safety seat could also injure
other passengers.

*

[SR25500( ALL)08/95]

R

WARNING

Carefully follow all of the manufacturer’s
instructions included with the safety seat
you put in your vehicle. If you do not
install and use the safety seat properly,
the child may be injured in a sudden stop
or collision.

*

[SR25520(MBC )07/95]

R

WARNING

Always keep the buckle release button
pointing upward and away from the child
seat, with the tongue between the child
seat and the release button as shown in
the following illustration.

File:03rcsrm.ex

Update:Wed Mar 27 09:23:48 1996

«
...
31
32
33
34
35
...
»

Summary of Contents for 1996 Mustang













































































































































































































































































































































Reviews:

No comments