1.
Connect the compressed-air spindle onto the compressed-air line using the adaptor.
2.
Select the proper pressure-adaptor for the brake calliper and plug it into the magnetic
fixture of the spindle
(1)
.
3.
Press aeration switch button
(2)
and manually pull back the spindle as far as it will go.
4.
Fix the tool at the brake calliper.
5.
Now pressure can be applied constantly to the brake piston by means of pressure
switch button
(3)
. You can control the direction of rotation with the angle piece
(4)
at
the end of the spindle. Please check in advance if the brake calliper has a right or
left-handed thread by making slight rotation.
Immoderate torque to wrong direction can cause damages at the brake calliper.
6.
Now turn back the brake piston into the calliper as far as it will go. The pressure
needed is being transferred due to compressed-air spindle and thus reliably prevents
sliding.
7.
Press aeration switch button
(2)
again, manually pull back the spindle and remove it
out of the brake piston.
ENG
Magnetic fixture (1)
Aeration switch button (2)
Pressure switch button (3)
Angle piece (4)
